150 cfm Fireplace Insert Blower… with Power Cord
This fireplace insert blower ships with the power cord pre-wired ready for installation. If your fireplace is equipped with a switch to turn the blower on/off than this is probably all you will require for complete installation.
If your fireplace has never had a blower installed you may also want a fireplace blower variable speed control, temperature sensor, or blower switch. Accessories purchased with the fireplace insert blower ship as an assembled kit. Installation requires no tools and takes just a few minutes.
Our 150 cfm fireplace insert blower will work in most fireplaces 36″ and larger and provides double the airflow that would have typically been installed in your gas fireplace… Its slim profile ensures it will fit through the service opening at the bottom of most fireplaces. At only 2 3/4″ deep x 16 1/2″ long it is just about the same size as 3 soda cans taped together end to end. Double check to see if this blower will fit in your fireplace using the soda can test… If it fits, but just won’t wiggle through the wires & pipes then you will want to look at our 150 cfm double fireplace blower kit for more airflow in tight spaces.
The specific dimensions of this fireplace circulating fan (blower) are 2 3/4″ x 3 1/2″ x 16.5″ if you are at all concerned about the fit of the blower…try the universal fireplace blower soda can test. A regular soda can is just a tiny bit larger than our fireplace circulating fan (height wise) if you can fit a soda can through the opening in the bottom of your fireplace & work it to the back around the gas valve & wiring… then you won’t have any trouble installing your new fireplace circulating fan.