75 cfm blower… with power cord
This 75 cfm blower ships with the power cord pre-wired ready for installation. If your fireplace is equipped with a switch to turn the fireplace fan blower on/off than this is probably all you will require for complete installation.
If your fireplace has never had a fireplace fan blower installed you may also want a fireplace temperature sensor, speed control, or remote control. Accessories purchased with the fireplace fan blower ship as an assembled kit. Installation requires no tools and takes just a few minutes.
75cfm- (cubic feet per minute) is the size fan that most manufacturers offer for fireplaces up to 32″… if your fireplace is larger you might consider our 150 cfm fireplace blower kit. As a matter of reference most furnace heat vents blow about 90 cfm.
The specific dimensions of the blower are 2 7/8″ x 3 1/2″ x 9 1/2″ (total length) if you are at all concerned about the fit of the 75 cfm blower…try the universal fireplace blower soda can test. A regular soda can is just a tiny bit larger than our blower (height wise) if you can fit a soda can through the opening in the bottom of your fireplace & work it to the back around the gas valve & wiring… then you won’t have any trouble installing your new blower.